Radio Shack PRO-136 Manuale Utente Scaricare il pdf (Pagina 18)

Scanning

PGM

3. Press T or S to select F0 to F14. If a FIPS code is not programmed,

------- appears.

4. Use the keypad to enter the FIPS code.

5. Press ENT/PROGRAM to store the FIPS code or press •/CLR/DELAY to

clear inputted FIPS code.

PGM

6. To set the scanner so it alerts you when you receive any FIPS code, press

T or S to select All FIPS, then press ENT/PROGRAM. The scanner

returns to Weather Scan Pause Mode.

7. To set the alert only for one of the areas you have programmed, press

T or S to select F0 to F14, then press ENT/PROGRAM. The scanner

returns to Weather Scan Pause Mode.

To clear a FIPS code:

1. In FIPS Programming Mode, press T or S to select F0 to F14.

2. Press 0 and then press ENT/PROGRAM. ------ appears.

PGM

Skywarn

The Skywarn function lets you jump directly to the last channel in memory

(Bank 9, Channel 19) from any mode by pressing and holding WX/

. The

scanner goes into manual mode and starts receiving transmissions in the last

channel.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Nessun commento

Radio Shack PRO-136 Manuale Utente Pagina 18